Igmp Group Information; Igmpv3 Information - Planet WGSD-10020 User Manual

4.8.6 IGMP Group Information

Entries in the IGMP Group Table are shown on this page. The IGMP Group Table is sorted first by VLAN ID, and then by group.
Each page shows up to 99 entries from the IGMP Group table, default being 20, selected through the "entries per page" input
field. When first visited, the web page will show the first 20 entries from the beginning of the IGMP Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP Group Table.
The IGMP Groups Informatino screen in
The page includes the following fields:
Object
VLAN ID
•
• Groups
• Port Members
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.

4.8.7 IGMPv3 Information

Entries in the IGMP SSM Information Table are shown on this page. The IGMP SSM Information Table is sorted first by VLAN ID,
then by group, and then by Port No. Diffrent source addresses belong to the same group are treated as single entry.
Each page shows up to 99 entries from the IGMP SSM (Source Specific Multicast) Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the
Figure 4-8-9 appears.
Figure 4-8-9 IGMP Snooping Groups Information page screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Ports under this group.
User's Manual of WGSD-10020 Series
163