Led Indications - Planet WGSD-10020 User Manual

Reset Button Pressed and Released
< 5 sec: System reboot
> 5 sec: Factory Default

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when
needed. Figure 2-3 & Figure 2-4
WGSD-10020 LED indication
System
LED Color
PWR Green
Per 10/100/1000Mbps port
LED Color
1000
Green
LNK/ACT
10/100
Green
LNK/ACT
Function
Reboot the Managed Switch
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。
。
。
。
。
shows the LED indications of these Managed Switches.
Figure 2-3 WGSD-10020 LED panel
Lights to indicate that the Switch has power.
Lights to indicate the port is running in 1000Mbps speed and successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running in 10/100Mbps speed and successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
User's Manual of WGSD-10020 Series
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
Function
Function
30