4.6 Device_Control
Topics Include:
n Warm_Start
n Restore_Default
4.6.1 Warm_Start
This command allows the user to restart the device.
Device_Control MENU
-----------------------------------------------------------------------
[Warm_Start] Restore_Default
Reset WANpro 2000
Enter: select ESC: previous menu '<': left '>': right
TAB: next item
Note: The default console password à "root"
About console password please to see section 4.4.4 "Security Menu"
4.6.2 Restore_Default
This command allows the user to change all configuration parameters back
to the factory defaults.
Device_Control MENU
-----------------------------------------------------------------------
Warm_Start [Restore_Default]
Restore All Parameter to Factory Default
Enter: select ESC: previous menu '<': left '>': right
TAB: next item
Note: The default console password à "root"
About console password please to see section 4.4.4 "Security Menu"
TAINET WANpro 2000
Please Enter Console Password :
TAINET WANpro 2000
Please Enter Console Password
Configure and Monitor Via PCs or Terminals
:
4-37