Table of Contents
Advertisement
Front Panel Lock
The setup procedures for the "Front Panel Lock" could be found as below.
a. Enter the main menu and select the configuration item
Main MENU
--------------------------------------------------------------------------------
[Configuration] Monitoring Device_Control
System PPP FR RIP Routing_Table Security NAT Filter DHCP
Enter: select ESC: previous menu '<': left '>': right TAB: next item
b. After login to "Configuration" item, select "Security"
(Default is setup to "root")
Configuration MENU
--------------------------------------------------------------------------------
System PPP FR RIP Routing_Table [Security] NAT Filter DHCP
Edit Console & Telnet Password
Enter: select ESC: previous menu '<': left '>': right TAB: next item
c. After login to "Security, select "Front Panel Lock" to enable/disable
Configuration MENU
--------------------------------------------------------------------------------
System PPP FR RIP Routing_Table [Security] NAT Filter DHCP
Edit Console & Telnet Password
Enter: select ESC: previous menu '<': left '>': right TAB: next item
Console Port Password [root
Telnet
Telnet Username
Telnet Password
Front Panel
Configure and Monitor Via PCs or Terminals
TAINET WANpro 2000
TAINET WANpro 2000
Please Enter Console Password :
TAINET WANpro 2000
]
[Enable ]
[root
]
[root
]
[Disable
The default value is "Enable".
Tainet2000 allows user get information from LCD display, but can
not change the setting.
]
When enable this function.
4-19
Advertisement
Table of Contents
