Dhcp - Tainet WANpro 2000 User Manual

Configure and Monitor Via PCs or Terminals

4.4.9 DHCP

Dynamic Host Configuration Protocol (DHCP) provides a method for
passing configuration to hosts on a TCP/IP network. DHCP is based on the
Bootstrap Protocol (BOOTP), adding the capability of automatic allocation
of reusable IP addresses and additional configuration options.
The setup procedures for DHCP could be found as below:
a. Enter the main menu and select the configuration item
Main MENU
-------------------------------------------------------------------------------------------------------
[Configuration] Monitoring Device_Control Diagnosis
System PPP FR RIP Routing_Table Security NAT Filter DHCP
Enter: select ESC: previous menu '<': left '>': right TAB: next item
'
b. After login to "Configuration" item, select "DHCP"
Configuration MENU
-------------------------------------------------------------------------------------------------------
System PPP FR RIP Routing_Table Security NAT Filter [DHCP]
DHCP Daemon Configuration
Enter: select ESC: previous menu '<': left '>': right TAB: next item
Default Lease Time(in secs)
Gateway
DNS Server
WINS Server
IP Address Pool for Dynamic Leases
Range from
to
IP-Ethernet Address Mapping for Fixed Leases
IP Address
[0.0.0.0
[0.0.0.0
[0.0.0.0
[0.0.0.0
4-26
TAINET WANpro 2000
TAINET WANpro 2000
[86400
[172.16.0.254 ]
[172.16.0.1
[172.16.0.1
[172.16.5.101 ]
[172.16.5.105 ]
Ethernet Address
] [000000000000]
] [000000000000]
] [000000000000]
] [000000000000]
]
]
]
IP Address Ethernet Address
[0.0.0.0 ] [000000000000]
[0.0.0.0 ] [000000000000]
[0.0.0.0 ] [000000000000]
[0.0.0.0 ] [000000000000]
Version 2.28t
Version 2.28t