Fcc Notice - Tainet WANpro 2000 User Manual

FCC NOTICE

This equipment has been tested to comply with limits for a digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with instruction manual, may cause harmful interference to
radio communication.
If the equipment does cause harmful interference to radio or television
devices, the user is encouraged to try to correct the interference by one or
more of the following advises:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
The FCC Rule is available from the U.S. government Printing Office,
Washington, DC 20402, Stock NO. 004-00000345-4.
The shielded RS-232 cable is to be used in order to ensure compliance with
FCC Part 15, and it is the responsibility of the user to provide and use
shielded RS-232 cable from NTU to personal computer.
We will not commit to repair this unconditional fault resulting from the user.
The warranty issue will only protect for right operations mentioned in the
manual, and extra charge for this fault might be noticed if necessary.
Any changes of modifications not expressly approved by the grantee
of this device could void the user's authority to operate the
equipment.