SNMP Agent
The setup procedures for the "SNMP Agent" could be found as below.
a. Enter the main menu and select the "Configuration" item
Main MENU
--------------------------------------------------------------------------------
[Configuration] Monitoring Device_Control Diagnosis
System PPP FR RIP Routing_Table Security NAT Filter DHCP
Enter: select ESC: previous menu '<': left '>': right TAB: next item
b. After login to "Configuration" item and select "System"
Configuration MENU
--------------------------------------------------------------------------------
[System] PPP FR RIP Routing_Table Security NAT Filter DHCP
Setup LAN IP, SubNetMask & WAN Protocol
Enter: select ESC: previous menu '<': left '>': right TAB: next item
LAN IP Address
LAN IP NetMask
WAN Protocol
SNMP
DHCP Daemon
The following describes the details of the setup items.
SNMP:
Disable/Enable SNMP agent.
Configure and Monitor Via PCs or Terminals
TAINET WANpro 2000
TAINET WANpro 2000
[10.0.0.254 ]
[255.255.255.0
[PPP
[Enable
]
[Enable
]
Now the SNMP agent only provides "SET" and "GET", and set the
Default Value as:
"Get Community: [Public]", "Set Community: [Telnet Password]"
for SNMP Manager used.
]
]
4-9