Table of Contents
Advertisement
The following describes the details of the setup items.
Type:
Identify the process model of current entry.
No:
No process will be done (default)
Permit:
The packet that meets the requirement in this entry will be
send/received by Wan Pro.
Deny:
The packet which meet the requirement in this entry will not be
sent/received by Wan Pro.
Source IP:
Identify the source IP address for current entry. It can be a
HOST or Network.
MASK-bit:
Identify the Subnet mask of the source IP. Presented by the
number of the mask bit.
Destination IP: Identify the destination IP address of current entry. It can be a
HOST or Network.
MASK-bit:
Identify the Subnet mask of the source IP. Presented by the
number of the mask bit.
Protocol:
Identify the protocol type of current entry.
ALL:
Include TCP/UDP/ICMP
TCP:
Current entry only effected TCP protocol.
UDP:
Current entry only effected UDP protocol.
ICMP:
Current entry only effected ICMP protocol.
Port:
Identify the port number of the services.
Configure and Monitor Via PCs or Terminals
In the bottom of this manual, Tainet2000 allows
user to "Permit" or "Deny" any kind of packet.
4-25
Advertisement
Table of Contents
