Cisco 7962G Administration Manual page 81

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-3 SIP General Configuration Menu Options (continued)
Option Description
Register Expires Displays the amount of time, in seconds, after
which a registration request expires.
Phone Label Displays the text that is displayed on the top
right status line of the LCD on the phone. This
text is for end-user display only and has no
effect on caller identification or messaging.
This value will always be set to null.
Enable VAD Displays if voice activation detection (VAD) is
enabled.
Start Media Port Displays the start Real-Time Transport
Protocol (RTP) range for media.
End Media Port Displays the end Real-Time Transport Protocol
(RTP) range for media.
Backup Proxy Displays the IP address of the backup proxy
server or gateway. This value will always be set
to USECommunications Manager.
Backup Proxy Port Displays the port number of the backup proxy
server or gateway. This value will always be set
to 5060.
Emergency Proxy Displays the IP address of the emergency proxy
server or gateway. This value will always be set
to USECommunications Manager.
Emergency Proxy Port Displays the port number of the emergency
proxy server or gateway. This value will always
be set to 5060.
Outbound Proxy Displays the IP address of the outbound proxy
server. This value will always be set to
USECommunications Manager.
OL-12641-01
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
Device Configuration Menu
To Change
From Cisco Unified
Communications Manager,
choose Administration
> Device > 
Device Settings > SIP
Profile.
Display only—cannot
configure.
From Cisco Unified
Communications Manager
administration, choose
> Device > 
Device Settings > SIP
Profile.
From Cisco Unified
Communications Manager
administration, choose
> Device > 
Device Settings > SIP
Profile.
From Cisco Unified
Communications Manager
administration, choose
> Device > 
Device Settings > SIP
Profile.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
4-13