Cisco 7962G Administration Manual page 187

Feature Support by Protocol for Cisco Unified
IP Phone 7962G and 7942G
This appendix provides information about feature support for the Cisco Unified IP Phone 7962G and
7942G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 6.0.
Table B-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager
6.0.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in
Table B-1 Cisco Unified IP Phone 7962G and 7942G Feature Support by Protocol
Cisco Unified IP Phones 7962G, 7942G
Features SCCP
Calling Features
Abbreviated Dialing Supported
Answer Release Supported
Audible Message Supported
Waiting Indicator
Auto Answer Supported
Auto Dial Supported
Barge (and cBarge) Supported
Busy Lamp Field Supported
(BLF) Call Lists
OL-12641-01
provides a high-level overview of calling features and their support by protocol. This table
SIP
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
A P P E N D I X
For More Information
"Basic Call Handling—Placing a
Call: Additional Options"
"Accessing Voice Messages"
"Using a Handset, Headset, and
Speakerphone—Using Auto Answer"
"Basic Call Handling—Placing a
Call: Basic Options"
"Advanced Call Handling—Using a
Shared Line"
"Advanced Call
Handling—Determining if Another
Line is Busy or Idle"
B
Table B-1.
B-1