Cisco 7962G Administration Manual page 113

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Fast Dial Service Allows a user to enter a Fast Dial code to
place a call. Fast Dial codes can be assigned
to phone numbers or Personal Address
Book entries. (See "Services" in this table.)
Forced Controls the types of calls that certain users
authorization codes can place.
(FAC)
(SCCP phones
only)
Group call pickup Allows a user to answer a call ringing on a
phone in another group by using a group
pickup code.
Hold Allows the user to move a connected call
from an active state to a held state.
Hold Reversion Limits the amount of time that a call can be
on hold before reverting back to the phone
that put the call on hold and alerting the
user.
Reverting calls are distinguished from
incoming calls by a single ring (or beep,
depending on the new call indicator setting
for the line). This notification repeats at
intervals if not resumed.
A call that triggers Hold Reversion also
displays an animated icon in the call bubble
and a brief message on the status line.
You can configure call focus priority to
favor incoming or reverting calls.
OL-12641-01
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to:
Cisco Unified
•
Communications Manager
Administration Guide, "Cisco
Unified IP Phone Services
Configuration" chapter.
Cisco Unified
•
Communications Manager
System Guide, "Cisco Unified
IP Phone Services" chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Client Matter Codes and
Forced Authorization Codes"
chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Call Pickup Group"
chapter.
Requires no configuration,
•
unless you want to use music
on hold. See "Music-on-Hold"
in this table for information.
See also: "Hold Reversion" in
•
this table.
For more information about
configuring this feature, refer to
Cisco Unified Communications
Manager Features and Services
Guide, "Hold Reversion" chapter.
5-9