Mounting The Phone To The Wall - Cisco 7962G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Figure 3-2

Mounting the Phone to the Wall

You can mount the Cisco Unified IP Phone on the wall using the footstand as a mounting bracket or you
can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be
ordered separately from the phone.) If you attach the Cisco Unified IP Phone to a wall using the standard
footstand and not the wall mount kit, you need to supply the following tools and parts:
•
•
See
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook
from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip
on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing
the Wall Mount Kit for the Cisco Unified IP Phone.
Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.
Procedure
Push in the footstand adjustment button.
Step 1
Adjust the footstand so it is flat against the back of the phone.
Step 2
OL-12641-01
Connecting a Cable Lock to the Cisco Unified IP Phone 7962G and 7942G
Screwdriver
Screws to secure the Cisco Unified IP phone to the wall
Figure 3-3 for a graphical overview of the phone parts.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
Adjusting the Placement of the Cisco Unified IP Phone
3-11