Configuring The Switch With Webview; Accessing Webview - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Configuring the Switch With WebView

Configuring the Switch With WebView
The following sections provide an overview of WebView functionality. For detailed configuration proce-
dures, see other chapters in this guide, the OmniSwitch AOS Release 6 Network Configuration Guide, or
the OmniSwitch AOS Release 6 Advanced Routing Configuration Guide.

Accessing WebView

WebView is accessed using any of the browsers listed on
are stored on the switch. To access WebView and login to a switch:
1
Open a web browser.
2
Enter the IP address of the switch you want to configure in the browser Address field and press Enter.
The login screen appears.
3
Enter the appropriate user ID and password at the login prompt (the initial user name is admin and the
initial password is switch) and click Login. After successful login, the Chassis Management Home Page
appears.
Note. You can access WebView through any NI on the switch.
page 12-8
page 12-1. All of the necessary WebView files
WebView Login Page
OmniSwitch AOS Release 6 Switch Management Guide
Using WebView
July 2010