Fujitsu SPARC Enterprise T5140 Product Notes page 83

Procedure for Recovering a Boot Drive's "drive type" (Continued)
CODE EXAMPLE A-1
syncing file systems... done
rebooting...
Resetting...
#
SPARC Enterprise T5240, No Keyboard
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4, 3968 MB memory available, Serial #xxxxxxxx.
Ethernet address xx:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a File and args:
SunOS Release 5.10 Version Generic_141414-10 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: host-1
The / file system (/dev/rdsk/c0t0d0s0) is being checked.
Reading ZFS config: done.
host-1 console login:
If prtdiag Is Canceled, Subsequent prtdiag
Executions May Fail to Display Status Information
(CR 6552999, 6731560)
This issue is resolved with Solaris patch ID 138082-01 or later.
If the verbose (-v) option is specified for the control domain prtdiag command, additional
environmental status information will be displayed. If Control-C is issued to interrupt the
output of this information, the picld(1M) daemon may enter the state in which environmental
status information is no longer supplied to prtdiag. If it does, additional environmental
data will no longer be displayed.
Workaround: The following command restarts the picld SMF service.
If prtdiag -v or prtpicl fails to display status information, wait for several minutes,
and then retry or restart picl.
Execute prtdiag -v about 10 minutes after picl is restarted.
Appendix A Fixed Issues 73