Fujitsu SPARC Enterprise T5140 Product Notes page 104

Issues Fixed in System Firmware 7.2.7.b or Later (Continued)
TABLE A-8
CR ID Description
6853843 On the DC input power model of SPARC Enterprise
T5140 Server, when you execute the prtdiag
command of Solaris OS, the "Environmental
Status" and some part of the "FRU Status"
information is not displayed.
For the incomplete data output example, see
DC Input Power Model, the "Environmental Status"
and Some Part of the "FRU Status" Information Is
Not Displayed (CR 6853843)" on page
6847308 In the backup of the ILOM settings, when the value
of the system identifier property (/SP
system_identifier) is its default value (none),
the value of the system description property (/SP
system_description) will be stored in the
backup file.
Example of erroneously stored data:
<entry>
<property>/SP/system_identifier
</property>
<value>SPARC-Enterprise-T5140,
ILOM v3.0.3.20.e, r46064</value>
</entry>
6823725 Once you set the searchpath property of the DNS
client function, you cannot change it back to the
default value (none).
6823516 In the DNS client settings, the number of retries
(retries property) cannot be set to "5."
94 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Workaround
Note - Fixed in System Firmware 7.2.7.b or later.
None.
From ILOM, check the component information and the
status of fan, temperature, power sensor and so on.
"On the
99.
Note - Fixed in System Firmware 7.2.7.b or later.
None.
Delete the entry of "/SP system_identifier" in
the backup file.
Note - Fixed in System Firmware 7.2.7.b or later.
None.
Note - Fixed in System Firmware 7.2.7.b or later.
None.
Set the integer between "0" and "4" to the number of
retries.