Fujitsu SPARC Enterprise T5140 Product Notes page 135

: /PS0/DC_POK : State Asserted"
IPMI
: /PS0/FAIL : State Deasserted"
Workaround: None.
After a Host Power-On Instruction Is Executed from
ILOM, the POST May Not Start, and Processing May
Not Go to OS Boot Processing or the ok Prompt (CR
6752910)
After a host power-on instruction is executed from ILOM, the POST may not start, and
processing may not go to Solaris OS boot processing or the ok Prompt for OpenBoot PROM.
[Using ILOM command mode]
-> start /SYS
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
[Using ALOM CMT compatible shell]
sc> poweron
sc> console
Enter #. to return to ALOM.
Nothing is displayed on the OS console. Entering the escape character "#." restores the
ILOM prompt. The result of the Domain Status may vary. No power-on log item has been
recorded in the event log.
showplatform command and showlogs command domain status reference example:
sc> showplatform
SUNW,SPARC-Enterprise-T5140
Domain Status
------ ------
S0 Powered off
initializing", "Unknown" etc.
sc>
sc> showlogs -p p
|minor : "ID = 1cf1 : 02/06/2009 : 04:00:59 : Power Supply
* Domain Status : "Powered on", "Powered off", "OpenBoot
To stop, type #.
Appendix B Minor Cases 125