Fujitsu SPARC Enterprise T5140 Product Notes page 108

[Using ALOM CMT compatible shell]
sc> setdefaults
sc> resetsc
Example of failure:
SUNSP-BEL07482AU login: root
Password:
Waiting for daemons to initialize...
Timed out waiting for daemons to start
sccd daemon has shutdown
Integrated Lights Out Manager
Version 3.0.3.20.e
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Warning: password is set to factory default.
->
Workaround: Initialize the service processor with the LAN cable connected to the ILOM
network port.
As long as the network port is linked up, the service processor can be initialized, even
without ILOM network settings.
If this problem occurs, restore normal system operation by using the following procedure:
1. Disconnect the power cord.
2. Connect the LAN cable to the ILOM network port.
3. Connect the power cord.
4. Verify that the ILOM network port is linked up.
98 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
<-- (*2)
<-- (*2)