Fujitsu SPARC Enterprise T5140 Product Notes page 106

Issues Fixed in System Firmware 7.2.7.b or Later (Continued)
TABLE A-8
CR ID Description
6737118 When you specified the -u option of the firmware
download command (sysfwdownload) which is
included in the firmware patch, after the completion
of firmware download, system power-off process
does not start automatically.
Execution example
# ./sysfwdownload -u
Sun_System_Firmware-7_1_3_d-
SPARC_Enterprise_T5120+T5220.pkg
WARNING: Host will be powered down for
automatic firmware update when download
is completed.
Do you want to continue(yes/no)? yes
.......... (7%)..........
(15%).......... (23%)..........
(31%).......... (39%).......... ...
Download completed successfully.
#
<- After this, the server power-off process does not
start.
n/a In System Firmware 7.2.2.e, a user who has the role
of Administrator fails to collect the snapshot from the
ILOM Web interface.
After the SCC Module Replacement, a Connection to the
ILOM Network May Fail (CR 6857271)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
During SCC module replacement, part of the data kept on the motherboard (*1) is
inadvertently overwritten with new SCC module data (*2). This results in a connection
failure to the ILOM network.
(*1) SCC module data including ILOM user data, network setting data, and diagnostics data.
For details, see the ILOM Supplement for each server.
(*2) The data is initialized at this point in time, so the data has no set values.
96 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Workaround
Note - Fixed in System Firmware 7.2.7.b or later.
None.
Stop Solaris OS and power off the system.
Note - Fixed in System Firmware 7.2.7.b or later.
Change the user role to "aucro" and then collect the
snapshot from the ILOM Web interface again.
Otherwise, collect the snapshot from the ILOM
command mode.