Fujitsu SPARC Enterprise T5140 Product Notes page 52

Firmware and General Software Issues (Continued)
TABLE 3-4
CR ID Description
n/a Regardless of whether a built-in fan is mounted or
not, its error may erroneously be detected and the
following error message may be displayed in the
machine administration of Enhanced Support Facility
(ESF) and in Server System Manager (SSM).
ESF message example
FJSVmadm:A:PS0:FJSVmadm:Detected
failure on the power supply unit
SSM message example
SSMAPL:A::FJSVapplg::status was
changed. (component:"PS0" from "normal"
to "fatal")
As far as the ILOM status check command (the show
faulty command) result is normal, it has no impact
on system.
n/a The Solaris OS system log may contain the ILOM
firmware output message "PCM Initialize event
detected," which is unnecessary.
Message example
SC Alert: [ID 203687 daemon.notice]
Chassis | minor: PCM Initialize event
detected
n/a From Solaris OS, when you use the System Firmware
download command (sysfwdownload) to perform
the ILOM firmware updates, the update may fail with
the following output message.
Example of update failure
# ./sysfwdownload Sun_System_Firmware-
7_1_3_d-SPARC_Enterprise_T5120+T5220.pkg
sysfwdownload: send/receive failed(2) -
"ret = -7"
#
42 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Workaround
When it is erroneously detected in ESF, apply the
Enhanced Support Facility 3.0 machine
administration patch 914718-01 or later.
When it is erroneously detected in SSM, apply the
Server System Manager patch (FJSVapagt patch)
914667-05 or later.
None.
No impact on system. The output message can be
safely ignored.
None.
Perform the ILOM reset operation and then perform
the ILOM firmware update again.