AMT Datasouth ACCEL-6300 User Manual page 242

Table E-1. Specifications––continued
Item
Paper paths
Feed methods
Special features
Cut sheet width
6310, 6310d
6350, 6350d
Pin-feed paper width
6310, 6310d
6350, 6350d
Paper length
Paper thickness
Single sheets
Multipart forms
Slew rate
Option
Specifications
Paper Paths and Paper
Top and rear; bottom with pull tractor option
or powered bottom-feed tractor on 6310d
and 6350d
Friction for cut sheets; tractor for pin-fed paper
Tear bar, first-line printing, auto bail, paper
out and paper jam sensing, demand docu-
ment and paper park, automatic forms thick-
ness detection and print gap adjustment,
remote paper source selection
From 3 to 12 inches (7.6 to 30.5 cm)
From 3 to 17 inches (7.6 to 43.2 cm)
From 4.5 to 11.5 inches (11.4 to 29.2 cm)
including pin-feed tear strips
From 4.5 to 16.5 inches (11.4 to 41.9 cm)
including pin-feed tear strips
From 3 to 30.3 inches (7.6 to 77 cm)
Up to 0.015 inch thick
7-part forms up to 0.024 inch thick
1 to 10 inches per second
Bottom-feed pull tractor
User's Guide
Specifications E-7