AMT Datasouth ACCEL-6300 User Manual page 216

Table D-6. Epson and IBM Escape Sequences––continued
Function
Set page length in lines .............
Set page length in inches ..........
Set print quality
Letter ....................................
Letter (alternate) .................
Memo ...................................
Memo (alternate) ................
Draft .....................................
Draft (alternate) ..................
Set typestyle family ..................
Courier (10 cpi) ...................
Gothic (12 cpi) .....................
Courier (10 cpi) ...................
Elite (12 cpi) ........................
Script (12 cpi) ......................
ASCII Hexadecimal
Boundaries, Tabs and Page Formatting––continued
ESC C n 1B 43 n
ESC C NUL n 1B 43 00 n
ESC x SOH 1B 78 01
ESC ESC P L 1B 1B 50 4C
ESC x STX 1B 78 02
ESC ESC P M 1B 1B 50 4D
ESC x NUL 1B 78 00
ESC ESC P D 1B 1B 50 44
ESC k n 1B 6B n
ESC k NUL 1B 6B 00
ESC k SOH 1B 6B 01
ESC k STX 1B 6B 02
ESC k ETX 1B 6B 03
ESC k EOT 1B 6B 04
Decimal
27 67 n This sequence sets the number of lines per page and sets the top-
of-form at the current line position. The value of variable n (0 to
182) determines the number of lines per page. Variable n should
equal the actual form length in inches divided by the current line
spacing. For example, if the current form length is 11 inches and
the line spacing is 1/6 inch, 11 divided by 1/6 is 66--so n should
equal 66 decimal. The number of lines per page is unaffected
by subsequent changes to line spacing.
27 67 0 n This sequence sets the number of inches per page and sets the
top-of-form at the current line position. The value of variable n
(1 to 30) determines the number of inches per page. For
example, if the form length is 11 inches, the correct n value is 11
decimal.
Text Functions
This sequence selects letter-, memo- or draft-quality print-
27 120 1 ing. Letter-quality characters are formed from a 32-dot-
27 27 80 76 high by 36-dot-wide matrix. Memo-quality characters are
27 120 2 formed from a 16-dot-high by 36-dot-wide matrix. Draft-
27 27 80 77 quality characters are formed from an 8-dot-high by 15-dot-
27 120 0 wide matrix.
27 27 80 68
Note: Some font options do not contain character sets for all
print qualities. If letter-quality is selected, but the font does not
contain this character set, memo-quality is selected; and vice-
versa. If the font contains neither a letter- or memo-quality
character set, the letter- or memo-quality Courier character set
is selected. If draft-quality is selected, but the font does not
contain this character set, the draft-quality Courier character set
is selected.
27 107 n This sequence selects the Courier, Gothic, Elite or Script
27 107 0 font and sets character spacing and cell size to the default
27 107 1 of the selected font. If the sequence selects a font that is
27 107 2 not in the installed Intelli-card, the printer sounds the
27 107 3 audible alarm, displays the message FONT UNAVAIL-
27 107 4 ABLE on the control panel, and continues printing.
User's Guide
Description
Code Sets D-37