AMT Datasouth ACCEL-6300 User Manual page 128

Correcting Printer Errors—continued
PROM CRC FAILURE
This error message appears when printer logic detects defective read-
only memory.
Corrective action: Contact your Service Representative for assistance.
RAM TEST FAILURE
This error message appears when printer logic detects defective random-
access memory.
Corrective action: Contact your Service Representative for assistance.
TOO MANY SETUPS!
This error message appears when there is not enough space in the
printer's non-volatile memory to store the printer settings you are trying to
save.
Corrective action: Using the RSTOR parameter on the Setup menu,
res-tore the Fctry (factory) settings. Then, use the SAVE parameter to
save the factory settings under several of the Usr names. These actions
free up space in the non-volatile memory. Then, reset the Setup menu
parameters to the settings you want to save and try the SAVE operation
again.
USER CRC ERROR
This error message appears when printer logic detects defective non-
volatile memory.
Corrective action: Contact your Service Representative for assistance.
User's Guide
Solving Problems 6-11