AMT Datasouth ACCEL-6300 User Manual page 210

Table D-6. Epson and IBM Escape Sequences––continued
Function
Set line spacing in ......................
1/120-inch increments
3 lines per inch .....................
4 lines per inch .....................
6 lines per inch .....................
8 lines per inch .....................
12 lines per inch ...................
Set line spacing in ......................
1/360-inch increments
3 lines per inch .....................
4 lines per inch .....................
6 lines per inch .....................
8 lines per inch .....................
12 lines per inch ...................
Set line spacing to 1/6" .............
Start new line spacing ..............
Set line spacing to 1/8" .............
Set line spacing to 7/72" ...........
Reverse line feed ......................
Paper feed in 1/216- or ...........
1/180-inch increments
ASCII Hexadecimal
Vertical Spacing––continued
ESC ESC A n 1B 1B 41 n
ESC ESC A H 1B 1B 41 48
ESC ESC A > 1B 1B 41 3E
ESC ESC A 4 1B 1B 41 34
ESC ESC A / 1B 1B 41 2F
ESC ESC A * 1B 1B 41 2A
ESC + n 1B 2B n
ESC + x 1B 2B 78
ESC + Z 1B 2B 5A
ESC + < 1B 2B 3C
ESC + - 1B 2B 2D
ESC + RS 1B 2B 1E
ESC 2 1B 32
ESC 2 1B 32
ESC 0 1B 30
ESC 1 1B 31
ESC ] 1B 5D
ESC J n 1B 4A n
Decimal
27 27 65 n This sequence sets the distance that the paper moves for
each line feed, reverse line feed, etc. The value of variable
27 27 65 72 n minus 32 defines a number of 1/120-inch increments to
27 27 65 62 move:
27 27 65 52
27 27 65 47 Line spacing = (n - 32) x 1/120-inch
27 27 65 42
27 43 n This sequence sets the distance that the paper moves for
each line feed, reverse line feed, etc. The sequence
27 43 120 specifies the distance as a number of 1/360-inch incre-
27 43 90 ments. The value of variable n defines the line spacing
27 43 60 distance:
27 43 45
27 43 30 Line spacing = n x 1/360-inch
27 50 This sequence sets line spacing to 1/6 inch.
Note: This sequence is not supported when the IBM XL24
emulation is active.
27 50 This sequence starts the new line spacing that was set by the Set
Line Spacing (ESC A) sequence. If no line spacing
sequence has been sent, the printer sets line spacing to 1/6 inch.
Note: This sequence is not supported when an Epson
emulation is active.
27 48 This sequence sets line spacing to 1/8 inch.
27 49 This sequence sets line spacing to 7/72 inch.
27 93 This sequence reverse feeds the paper one line space so the next
print line is above the previous line.
27 74 n This sequence advances the paper a specific distance with-
out changing the current line spacing. The sequence speci-fies
the distance as a number of 1/216- or 1/180-inch incre-ments,
depending on the active emulation. When the Epson JX or IBM
XL24 emulation is active, the distance is in 1/216-inch
increments. When the Epson LQ-2550 emulation is active, the
distance is in 1/180-inch incre-ments. For example, with the
Epson JX emulation active, to move the paper 18/216 inch, the
correct sequence is ESC J DC2.
Note: When the IBM XL24 emulation is active, the Set
Vertical Units sequence forces the vertical distance unit to either
1/216 or 1/180 inch.
User's Guide
Description
Code Sets D-31