AMT Datasouth ACCEL-6300 User Manual page 140

Checking Sensors and Switches—continued
Sensor: Rear Jam
Sensor: Bot Jam
Button: Setup
Button: Quality
Button: Font
Button: Test
Button: Clear
Button: Bail
Button: Alt
Button: PaprPark
Button: PaprPath
Button: LineFeed
Button: FormFeed
4) TEST: Sensor
To test the rear and bottom paper jam sensors,
turn the wheel on each sensor.
To test a control panel button, just press the
button and look for a confirmation message.
Pressing the Ready button terminates the test.
Note: If you are unable to get a confirma-
tion message, the selected sensor or switch
is malfunctioning. Contact your Service
Representative for help.
To stop the test and return to the Setup menu,
press the Ready button.
User's Guide
Solving Problems 6-23