AMT Datasouth ACCEL-6300 User Manual page 219

User's Guide
Table D-6. Epson and IBM Escape Sequences––continued
Function
Print character ........................
Enable/disable characters
with codes 128-159, 255
Enable ..................................
Disable .................................
Enable/disable characters ........
in control code range
Enable
Disable .................................
Select characters for ...............
codes above 159
Italics ....................................
Graphics ...............................
Bold printing
Start ......................................
End .......................................
Shadow printing
Start ......................................
End .......................................
D-40 Code Sets
ASCII Hexadecimal
Text Functions––continued
ESC ^ n 1B 5E n
ESC 6 1B 36
ESC 7 1B 37
ESC I n 1B 49 n
ESC I 1 1B 49 31
ESC I 0 1B 49 30
ESC t n 1B 74 n
ESC t 0 1B 74 30
ESC t 1 1B 74 31
ESC G 1B 47
ESC H 1B 48
ESC E 1B 45
ESC F 1B 46
Decimal
27 94 n This sequence prints a character that is assigned a valid
control code. The value of variable n in the sequence is the
control code assigned to the character. For example, to print the
music note symbol assigned to the CR control code, the correct
sequence is ESC ^ CR.
These sequences enable and disable the printing of inter-
national characters assigned to codes 128 through 159 and
27 54 255. When disabled, the printer performs the control
27 55 functions assigned to these codes.
27 73 n This sequence enables and disables the printing of char-
acters with codes 0 to 6, 16, 17, 19, 21 to 26, 28 to 31,
27 73 49 129 to 134, 144, 145, 147, 149 to 154, and 156 to 159
27 43 48 decimal.
Note: This sequence is not supported when the IBM XL24
emulation is active.
27 116 n This sequence selects the characters that print for codes
above 159. The sequence can select either the italic ASCII
27 116 48 characters or the normal IBM graphic characters. With the
27 116 49 italic characters selected, add 128 to the normal character code
to print the italicized version. For example, to print an italicized
letter A (code 65 decimal), send code 193 (65 + 128 = 193).
These sequences start and end bold printing at the current
27 71 print position. For bold, the printer prints each character
27 72 twice at the character's normal print position (this requires a
second printing pass over the line).
These sequences start and end shadow printing at the cur-
27 69 rent print position. For shadow, the printer prints each
27 70 character twice––once at the character's normal print posi-
tion, and once 1/120-inch to the right of this position
(this requires a second printing pass over the line).
Description