AMT Datasouth ACCEL-6300 User Manual page 186

Table D-3. AMT Datasouth and Diablo 630 Escape Sequences––continued
Function
Auto carriage return ...............
Start ......................................
End .......................................
Auto line feed ............................
Start ......................................
End .......................................
Auto line wrap
Start ......................................
End .......................................
Auto perforation skip ...............
Start ......................................
End .......................................
Unidirectional printing .............
Start ......................................
Start (alternate) ....................
End .......................................
End (alternate) .....................
Ignore codes ..............................
Restore control code ...............
functions
ASCII Hexadecimal
Basic Functions––continued
ESC @ CR n 1B 40 0D n
ESC @ CR 1 1B 40 0D 31
ESC @ CR 0 1B 40 0D 30
ESC @ LF n 1B 40 0A n
ESC @ LF 1 1B 40 0A 31
ESC @ LF 0 1B 40 0A 30
ESC ? 1B 3F
ESC ! 1B 21
ESC @ FF n 1B 40 0C n
ESC @ FF 1 1B 40 0C 31
ESC @ FF 0 1B 40 0C 30
ESC @ U n 1B 40 55 n
ESC @ U 1 1B 40 55 31
ESC \ 1B 5C
ESC @ U 0 1B 40 55 30
ESC / 1B 2F
ESC @ I n 1B 40 49 n
ESC SI 1B 0F
Decimal
27 64 13 n This sequence starts and ends the automatic carriage return
27 64 13 49 mode, wherein the printer performs a carriage return and
27 64 13 48 line feed for every line feed code it receives.
27 64 10 n This sequence starts and ends the automatic line feed mode,
27 64 10 49 wherein the printer performs a carriage return and line feed
27 64 10 48 for every carriage return code it receives.
These sequences control the automatic line wrap mode,
27 63 wherein the printer performs a carriage return/line feed
27 33 when printing reaches the rightmost print position on a line. The
rightmost print position on a line is determined by the WIDTH
setting on the printer's Setup menu. With the auto line wrap
mode off, the printer truncates text and graphics that exceed the
rightmost print position.
27 64 12 n This sequence starts and ends the automatic perforation
27 64 12 49 skip mode, wherein the printer performs a form feed when-
27 64 12 48 ever printing reaches one-half inch from the bottom of the page.
The form feed advances the paper one-half inch beyond the next
top-of-form or top margin (if one is set).
27 64 85 n This sequence starts and ends unidirectional printing, where-
27 64 85 49 in printing occurs only while the carriage moves from left-
27 92 to-right. Unidirectional printing enables the exact align-
27 64 85 48 ment of multi-line graphics, component characters and
27 47 other applications where vertical alignment is crucial.
27 64 73 n This sequence causes the printer to ignore from 1 to 95
subsequent codes that it receives. The value of n minus 32
defines the number of codes to ignore. For example, to ignore
the next 20 codes, the correct escape sequence is ESC @ I 4.
27 15 This sequence cancels the printing of characters with codes
1 to 6 that was enabled by an SO control code.
User's Guide
Description
Code Sets D-7