Video Info (Video Information); Up-Scaling (Hdmi Up-Scaling); Aspect Ration (Hdmi Aspect Ratio); Hdmi Control - Yamaha YSP-4000 Owner's Manual

VIDEO INFO (Video information)
Use to display the video information of the current input
signal.
Choices: HOMI SIGNAL, HOMI RES., HOMI ERROR
l 'liTrE·
·"F"
,', '!, ,,',
II
1
~,j
II
1.1
d~' •
jll •
.. HNlI SI Gt,I>:lL· •• HDt'1I -) HDt'lI
HDMI RES.····1880P -) 1080P
HNlI ERROR··· ----
[.a]/[T]:
Up/[)Qwn
[ENTER] : Retl.wt"'
• Select HOMI SIGNAL to display the type of the
HOMI input/output signals.
• Select HOMI RES. to display the resolution of the
HOMI input/output signals.
• Select HOMI ERROR to display the error message for
HOMI sources or devices connected
(see page III for details).
UP-SCALING (HOMI up-scaling)
Use this feature to activate or deactivate the HOMI up-
conversion of the analog video signals input at the
composite video and component video jacks so that the
up-scaled analog video signals are output at the HOMI
OUT jack. This unit up-scales the analog video signals as
follows:
• 480i (NTSC)/576i (PAL)
~
480p (NTSC)/576p (PAL),
I080i or
nop
• 480p (NTSC)/576p (PAL) ~ I080i or nop
Choices: OFF, THROUGH, 480p (or 576p), 1080i,
nop
," ",!
Ir'-'~r'OI
r
f,jl~
' . ' , ' '.,r
.".'111.'\'11'.1
HDt'1I UP-SC>:lLHIG··· *720p
(480p 1080i *720p)
[-tI]/[~]:Select
[ EtHER] : Retur-n
• Select OFF to deactivate the HOMI up-conversion
feature
• Select THROUGH not to up-scale any analog video
signals.
• Select 480p (or 576p), I080i, or
nop
to up-scale
analog video signals to 480p (or 576p), 1080i, or
nop
of resolution.
MANUAL SETUP
Notes'
• When "MONITOR CHECK" is set to "YES", this unit receives
the information of the available video signal resolutions from
the video monitor connected via HOMI and you can only select
the resolutions supported by the video monitor in "UP-
SCALING" (see page 97).
• When "MONITOR CHECK" is set to "SKIP", an asterisk
(*)
appears on the left of the unavailable video signal resolution(s)
(see page 97).
ASPECT RATIO (HOMI aspect ratio)
Use this feature to select the adjustment of aspect ratio for
analog video signals output at the HOMI OUT jack.
Choices: THROUGH, 16:9 Normal, Smart Zoom
.·j\H"CC' C TT
~'i""TI·'
'Jil .'1 I.'.',
",H I
j.'
HDt'1I
~SPECT
R>:lTIO··· THROUGH
[-tI]/[~]:
Seled,
[ENTER]: Ret'Jr-n
• Select THROUGH if you do not make any adjustments
to the aspect ratio for HOMI video signal sources.
• Select 16:9 Normal to display video images with 4:3 of
aspect ratio on your video monitor with 16:9 of aspect
ratio. Black stripes appear on the right and left sides as
a result.
• Select Smart Zoom to fit video images with 4:3 of
aspect ratio to your video monitor with 16:9 of aspect
ratio.
•' "'il
Nt!teS:fj
• When "UP-SCALING" is set to "THROUGH", you cannot
make any adjustments to "ASPECT RATIO".
• When "ASPECT RATIO" is set to "Smart Zoom", the video
images of the edge of the video monitor are rather stretched.
• When the video signals are input at the HOMI IN jacks or the
signals are input with 720p or I080i of resolution, the
"ASPECT RATIO" setting does not affect the video signals
output at the HOMI OUT jack.
HOMI CONTROL (HOMI control)
Use this function to link this unit and an HOMI control-
compatible TV via HOM!. You can tum on or off the
power, select the input mode, and adjust the volume level
of this unit using the remote control supplied with your
HOMI control-compatible TV. For details, see "Using the
HOMI control feature" on page 75.
Choices: OFF, ON
87
En
•