Setting The Panel Input Key - Yamaha YSP-4000 Owner's Manual

Adjusting the system parameters
4
Press
<1/ ~ to switch between "DEMO: ON"
and "DEMO: OFF".
You can disable the INPUT on the front panel when you
adjust the system parameters.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 94.
• Select DEMO: ON to activate the demo mode.
• Select DEMO: OFF to deactivate the demo mode.
3
Press
L:::,. /
'7
so that "PANEL INPUT KEY" is
displayed in the front panel display.
2
Set the operation mode selector to YSP.
+
DENO: ON
*
DENO:
OFF
5
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
~
+
PANEL INPUT KE'.,.'
The new setting will be activated when you tum on
the power of this unit next time.
Press ENTER while playing back sources to test the
sound beam.
The sound beam being output shuttles between left
and right. Press ENTER again to stop shuttling.
•
99
En