Adjusting The Audio Balance - Yamaha YSP-4000 Owner's Manual

Adjusting the audio balance
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
Press
L:::..
1
"V
to select the channel you want
to adjust.
The front panel display changes as follows:
NO~':\ij
•. ;<.•
ulll
"TEST SWFR" is only available when a subwoofer is
connected to this unit and SWFR is selected for BASS OUT
in SOUND MENU (see page 83).
TEST FF.'ONT L
t
TEST CENTER
t
TEST FRONT R
t
TEST SUR. R
t
TEST SUR. L
t
TEST SMFR
..
3
(U.S.A. and Canada models)
1
Set the operation mode selector to YSP.
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use this to set the channel levels so that the volume level
of each channel is identical when heard from your
listening position.
4
Press
<11
~
to adjust the channel volume.
2
Press TEST.
"TEST FRONT L" appears in the front panel display
and a test tone is output from the front left channel.
Control range: -10.0 dB to
+
1 0.0 dB
TEST
LB
+
TEST FF.:ONT L
90
En