Table of Contents
Advertisement
TV Remote Repeater
➜
Setup Menu
Function
Turn the TV Remote Repeater function on or off.
Settings
Off (default)
Disable the TV Remote Repeater function.
On
Enable the TV Remote Repeater function.
For details, see "Operating a TV via the TV Remote Repeater function of the unit"
(p. 58).
Information
Display information for the audio and video signal input to this unit.
➜
TV Remote Repeater
Setup Menu
The following information on the current audio input signal is displayed.
Format
Number of channels
Sampling frequency
Bit rate
• The audio bit rate or sampling frequency may not be displayed for some input signals.
Setup Menu
The following information on the current video input signal is displayed.
Type
Resolution
Setup Menu
Display the version of firmware currently installed on this unit.
Audio
➜
Information
Digital audio format
The number of channels contained within the input signal—front/
surround/low frequency effects (LFE). Example: "3/2/0.1" means signal
contains 3 front channels, 2 surround channels, and LFE.
If the signal contains channels other than front, surround, and LFE, the
total number of channels may be displayed. Example: "5.1ch".
The sampling frequency of the digital input signal
The per-second bit rate of the input signal
Video
➜
Information
HDMI or DVI
Video signal resolution
System
➜
Information
➜
Audio
➜
Video
➜
System
SETTINGS ➤ Setup menu
En
53
Advertisement
Table of Contents
