Controls and functions
-"<:<':'1-::':'_',,<';:
Front
;.;.;.,.:.;.;..
~':)
-::~::;,,<.~::.~
1
A UX3
INTELLIBEAM MIC
INPUT
-
VOLUME
+
STANDBY/ON
CD
Remote control sensor
Receives infrared signals from the remote control.
®
Front panel display
Shows information about the operational status of this
unit.
@ AUX 3 input jack
Connect your portable audio player (see page 27).
@ INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO
SETUP (see page 38).
®
INPUT
Press repeatedly to switch between input sources (see
page 47).
Outputs a test tone to experience the sound beam (see
page 98).
®
VOLUME+/-
Controls the volume level of all audio channels (see
page 49).
(j) STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 33).
·~~i~i~
• When you turn on this unit, you will hear a click sound
followed by the 4 to 5-second interval before sound
reproducing.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.
7
En
•