Preset Search Mode; Direct Number Access Mode; Presetting The Xmtm Satellite Radio Channels - Yamaha YSP-4000 Owner's Manual

XMTM Satellite Radio tuning (U.S.A. and Canada models only)
• Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode. you must preset the XM channels. For details, see
"Presetting the XMTM Satellite Radio channels" on page 9.
1
Press SEARCH repeatedly to select
"PRESET SEARCH".
SEARCH q
+
XlI
PF.:E5ET 5EHF.:CH
2
Press CAT/A-EO (<I/~) repeatedly to change
the preset channel group (A to E).
3 Press ENTRY ~ (A / "V'") repeatedly to
change the preset channel number (1 to 8).
.0,
~<i>~
You can also use the numeric buttons to directly input the preset
channel number.
8
En
• Direct Number Access mode
1
Press SEARCH repeatedly to select either
"ALL CH SEARCH" or "CAT SEARCH".
SEARCH q
+
XlI
HLL CH 5EHF.:CH
or
XlI
CHT 5EHF.:CH
2
Press the numeric buttons (0 to 9) to enter
the desired three-digit XM channel number.
For example, to enter the number 123, press the
numeric buttons I, 2, and 3.
The front panel display changes as follows:
XlI
.... ' . ..'h1\
--1
... ,", I ,.'
+
XlI
<: : : - : ; til : : : . - 12
+
XlI
. . . . ' " ,' "1 \
1,-,
'7
0., ,"" •••0
~._I
• To enter a one- or two-digit number, press the corresponding
number button(s), and press ENTER to confirm the number. If
you do not press ENTER, this unit automatically confirms the
entered number after a few seconds.
• If you press a button other than the numeric buttons and
ENTER during this operation. the Direct Number Access mode
is canceled.