Adjusting Surround Mode Parameters; When Dolby Pro Logic Ii Music Is Selected; When Dts Neo:6 Music Is Selected - Yamaha YSP-4000 Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP-4000:
Table of Contents

Advertisement

Enjoying surround sound
(U.S.A. and Canada models)
DIMENSION
Adjusts the difference in volume between the front
and surround channels to the desired volume balance.
Control range:
-3 (toward the surround direction) to
+3 (toward the front direction)
Default setting: STD (standard)
C.
WIDTH
Distributes the center channel sound to the left and
right. If 0 is selected, the center channel sound is
output only from the center channel.
Control range: 0 to 7
Default setting: 3
When Dolby Pro Logic II Music is
selected
PANORAMA
Gives the front left and right channel sound a
wraparound effect, distributed throughout the entire
surround sound field to give you an expansive feeling.
Choices: ON/OFF
Default setting: OFF
Adjuslingsurro,und
.mo~(i;;
. . " ""
"'.",0;'
")
para,ti!~!l!l§',
:"
'i
O
; , ' "
: ' ,
1
Repeat steps 1 and 2 in "Enjoying 2-channel
sources in surround sound" on page 59 and
select PL II Music or Neo:6 Music.
You can configure the parameters for Dolby Pro Logic II
Music and DTS Neo:6 Music to fine-tune the surround
sound effect.
2
Press.6.
I
"V
to select the parameter.
3
Press
<J
I
t>
to configure the selected
parameter.
When DTS Neo:6 Music is selected
C.IMAGE
Adjusts the center image from three channels (front
left and right and center) to varying degrees.
Control range: 0.0 (wider) to 1.0 (toward the center)
Default setting: 0.3
61
En

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ysp-4000slYsp-4000bl

Table of Contents