Input Rename; Hdmi Set (Hdmi Settings); Support Audio - Yamaha YSP-4000 Owner's Manual

MANUAL SETUP
• INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(e.g., DVD) to select the component you want to change
the name for and perform the following procedure.
"'
"'~'IT
-E""tl E
In
Ir' 1 '
II
~'i'lH'
It'.' il.1 • I',
11
[;.I..JD
->
L'UD
[otl
]/[Jt-]: Posi tion
[A] / [T]:
Char.3cter
[HHER] : Rehlr'n
1
Press
<]1 [>
to place the _ (underscore) under
the space or the character you want to edit.
The _ (underscore) flashes.
2
Press
D..
I
V'
to select the desired character.
• You can use up to 8 characters for each input.
• Press
V'
to change the character in the following
order or press
D..
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+.
etc.
3
Repeat steps 1 to 2 to rename each input.
4
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
86
En
• HOMI SET (HOMI settings)
Use to change the HDMI audio/video output/input to
match the connected component.
Choices: SUPPORT AUDIO (Support audio),
VIDEO INFO (Video information),
UP-SCALING (HDMI up-scaling),
ASPECT RATIO (HDMI aspect ratio),
HDMI CONTROL (HDMI control)
DHDm SET
.. a)SUPPORT flUDIO
b)UIDEO INFO
C)UP-SCflLHIG
d)flSPECT RflTIO
e) HDNI CotHROL
[A]/[T]:
Up/DOl,Jn
[E~HER]: Enter
SUPPORT AUDIO (Support aUdio)
Use to select whether to play back HDMI audio signals on
this unit or on another HDMI component connected to the
HDMI OUT jack of this unit.
Choices: VSP-4000, OTHER
Jt-VSP-4C100 OTHER
[otI]/[Jt-]:Select
[E~HER]: Return
.
. '
...•. ~
Not6;Sf;
• This setting is effective when HOM! CONTROL is set to OFF
(see page 87).
• The HOM! video signals input at one of the HOM! !N jacks of
this unit are always output at the HOMI OUT jack of this unit.
• When HOM! CONTROL is set to ON, this setting is ineffective.
This unit follows the setting of the HOM! control-compatible
TV.