Selecting A Preset Station; Displaying The Radio Data System Information - Yamaha YSP-4000 Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP-4000:
Table of Contents

Advertisement

FM
tuning
SeJ/#ctiiJg' a pre,etstatifJn,
. ' .
0 ' "
, ' .
"".
""=:
You can tune into the preset stations simply by selecting
the preset station groups and numbers.
1
Set the operation mode selector to TV/AV.
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
,0,
~<i>~
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press
FM/XM
again to display "FM" (U.S.A. and Canada models only).
3
Press A-E ••
(<]/
t>)
to select the desired
preset station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
,',
~<i>~
• If the colon (:) does not appear, press PRESETITUNE to
display the colon.
• U.S.A. and Canada models use CAT/A-E
~
•.
• Even when the operation mode selector is set to YSP, you
can select the desired preset group by pressing A-E (CAT
for U.S.A. and Canada models).
54
En
4
Press ENTRY
~
(L:::::../vr) to select the desired
preset station number (1 to 8).
The preset station group and number appear in the
front panel display together with the station band and
frequency.
+
H1: FN SS• ' 3 i'l H
z
,0,
~<i>~
• You can also use the numeric buttons to select the desired
preset station number.
• Even when the operation mode selector is set to YSP. you
can select the desired preset number by pressing L:::::../vr.
Radio Data System is a data transmission system used by
FM stations. You can display the four types of the Radio
Data System information: PS (program service), PTY
(program type), RT (radio text), and CT (clock time). The
corresponding indicators light up in the front panel
display.
• You can select the Radio Data System display modes only when
the corresponding Radio Data System indicators are lit in the
front panel display. It may take a while for this unit to receive
all of the Radio Data System data from the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the "RT" mode requires a large amount of data and
may not be available even when the other Radio Data System
display modes are available.
• In case of poor reception conditions, tune into the desired
station manually (see page 51 ).
• In case the signal strength is weakened by external interference
while this unit is receiving the Radio Data System data, the
reception may be cut off unexpectedly and " ...WAIT" appears in
the front panel display.
• If the reception is cut off when the "CT' mode is selected, "CT
WAIT" appears in the front panel display.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ysp-4000slYsp-4000bl

Table of Contents