Connecting A Digital Airwave Tuner - Yamaha YSP-4000 Owner's Manual

Connections
ConiJ'iictlng
i;d.}i/ta.1 airwa"vefulferJi"j.r.:
. . ,.... , ..' . ' V .__
·'A~"'_.'
For audio connection, connect the TV/STB AUDIO IN jacks on this unit to the analog audio output jacks on your TV.
Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL IN jack on this
unit in addition to the analog audio connection. By doing so, you can enjoy both analog and digital broadcasts.
For video connection, connect the video output jack of your digital airwave tuner to the STB VIDEO IN jack of this unit.
If your digital airwave tuner has component video output jacks, connect the component video output jacks of your digital
airwave tuner to the STB COMPONENT VIDEO IN jacks of this unit. Once the component video connection is made,
you can enjoy images with better resolution.
.:,¥-:
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21).
Rear panel of this unit
Optical
digital
output
€ ~
~
e
TV/STB AUX 1
-AUDOIN
Connect to the analog
audio output jacks on
the TV.
~
AUX 1
• You can only make
either a composite
or a component
connection.
Component
video output
DVD AUX 2
~COAXIAL@
~ tj]
OPTICAL
~
TV/STB AUX 1
DIGITAL IN
--r-=~---------+----+----
I
0
~~~~~. ANTENN~
r---============l....---,SUBWOOFER
COMPONENT
M
DVD/AUX 2
VIDEO IN - - - - - - - '
COMPONENT
rc~
I_-
STB
-
Video
output
*
o
Video signal to the TV
• This connection (except for a game console) is not
necessary if your TV has a built-in digital satellite
tuner. cable TV tuner, or digital airwave tuner.
Digital airwave tuner
~
Video
Video pin cable
o
Component video pin cable
2'
Optical cable
26
En