Connecting A Tv; Osd Video Pin Cable - Yamaha Digital Sound Projector HTY-750 Owner's Manual

Connections

Connecting a TV

For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this
unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB
OPTICAL DIGITAL INPUT jack on this unit.
For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD
for easy viewing when you adjust the system parameters in SET MENU.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
Note
If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals
input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO INPUT
jacks.

OSD video pin cable

18
En
L
R
VCR TV/STB SUBWOOFER
AUDIO INPUT
R L
Analog
audio
output
Video
Rear panel of this unit
VIDEO TV/STB AUX DVD
OPTICAL COAXIAL
OUT DIGITAL INPUT
Video
Optical
input
digital
output
TV
Audio pin cable
Optical cable
SYSTEM
CONNECTOR
Audio