Setting The Demo Mode - Yamaha YSP-4000 Owner's Manual

Adjusting the system parameters
4
Press
~
/
t>
to switch between "MON CHK:
YES" and "MON CHK: SKIP".
+
You can test the sound beam output from this unit to
experience the sound beam.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 94.
2
Set the operation mode selector to YSP.
• Select MON CHK: YES to activate the monitor
check function.
• Select MON CHK: SKIP to deactivate the monitor
check function.
NOH CHK:
/' 1 0H CHK:
'.,.'ES
SKIP
3
Press
6. / '7
so that "DEMO MODE" is
displayed in the front panel display.
+
5
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
~
The new setting will be activated when you turn on
the power of this unit next time.
Not~~
If you change the setting of "MONITOR CHECK", "UP-
SCALING" is automatically set to "OFF" (see page 87).
98
En
DENO NODE