Using Auto Setup (Intellibeam); Assembling The Supplied Cardboard Microphone Stand - Yamaha YSP-4000 Owner's Manual

AUTO SETUP (IntelliBeam)
tisingifLJT()'SETtlP.{lnte!!i~ea",!>
Once the IntelliBeam microphone is firmly connected to
this unit and properly placed in your listening room.
follow the procedure below to start the AUTO SETUP
procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP for more than two
seconds. In this case. this unit performs both of the beam
optimization and sound optimization procedures.
2
1
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
• Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular part and
two longitudinal parts) of the cardboard microphone stand
originally put together.
2
Insert one of the longitudinal part into the
crevice of the other longitudinal part.
(U.S.A. and Canada models)
3
Place the circular part on top of the two
combined longitudinal parts.
4
Place the supplied IntelliBeam microphone
on top of the circular part.
I
39
En