Softkey Assignment - Nortel IP Phone 1110 User Manual

86 Call Services
To realize the greatest benefit from softkey assignments, you can assign
two features to a single softkey. However, you can only assign two features
to the same key as long as one has a Hide when idle profile and the other
is Hide when active. You cannot assign two features to the same key if
one feature has a Never hide profile.
Possible combinations of features assigned to softkeys are:
•
•
•
•

Softkey assignment

The Centrex features assigned to you by the administrator, are always
available through the Call Services menu. You do not have to assign a
feature to a softkey to be able to use the feature.
The first time you log onto the IP Phone, the available Centrex features are
automatically assigned to the softkeys. The default softkey assignment is
set by the administrator. The method for this provisioning is based on the
numerical order of the feature keys on the core.
For example, if you transfer from an IP Phone 2004 to an IP Phone 1110
for the first time, the Call Service features that were provisioned on feature
keys 2, 3, and 4 on the 2004, are assigned to softkeys 2, 3, and 4 based on
the feature profile of each feature.
Key 1 on the CS2000 is reserved for the primary directory number (DN), or
the associated Directory Number feature.
After you log on the first time and the default key assignments are made,
you can change the assignments to suit your own needs. Changing the
feature to softkey association does not create new functionality, but instead
changes the key on which the feature is available.
The table, Example 1: Default softkey assignment, is an example of Centrex
features and default softkey assignments.
Sample: Default softkey assignment
Key 2004 feature
assignment
2
Three Way Call
3
Call Forward
Copyright © 2006 , Nortel Networks
.
Three Idle features and three Active features
One Never Hide feature, two Idle features, and two Active features
Two Never Hide features, one Idle feature, and one Active features
Three Never Hide features
Feature profile
Hide when idle
Hide when
active
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
1110 softkey
assignment
1
1
Carrier VoIP
Automatic softkey
assignment on 1110
Yes. The feature appears
only when the terminal is
active.
Yes. The feature appears
only when the terminal is
idle.
Nortel Networks Confidential