Viewing, Disabling, Or Enabling Auto Login - Nortel IP Phone 1110 User Manual

54 Using the User menu
2
3
4

Viewing, disabling, or enabling Auto Login

Follow this procedure to view, disable, or enable auto login.
Any maintenance activity, for example a firmware upgrade, results in a
forced log off. If you enable Auto Login, you are automatically logged on to
the IP Client Manager when the terminal is available again.
Prerequisites
You must have permission to edit the Auto Login setting. If you have
permission, a check mark appears beside Enabled when the screen
appears.
Step
1
2
3
4
5
6
Copyright © 2006 , Nortel Networks
.
From the Settings menu, open the User menu.
From the User menu, select and open Login Type.
If the current login type is unique, Unique is displayed. If the current
login type is joint, Joint is displayed.
Press Ok, or press the send key.
You return to the User menu.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the User menu.
From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login profile.
If you do not have permission to edit this feature, the procedure is
finished
If you have permission to edit this feature, click Ok, or press the
send key.
The Enabled screen appears. A check mark appears if the feature
is enabled.
Perform one of these actions:
• To enable Auto Login, select Enabled.
• To disable Auto Login, select Disabled.
Press Ok, or press the send key.
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
—End—
Nortel Networks Confidential