Setting The Date Format - Nortel IP Phone 1110 User Manual

50 Using the Regional Menu
4
5
6

Setting the date format

Follow this procedure to set the date format the terminal uses to display
the current date. When month (mmm) is selected, the display shows an
abbreviated name, Oct for example, and not a number.
The date format choices are:
•
•
•
•
Step
1
2
3
4
5
6
7
Copyright © 2006 , Nortel Networks
.
From the Time menu, select and open Time Format.
The Time Format screen appears.
Scroll through the Time Format options to select the format you want.
A check mark appears beside the format currently is use.
To enable a format, select it and press Ok, or press the send key.
A check mark appears beside the option, to indicate that it is
enabled. The time is displayed in the selected format. You return to
the previous screen.
mmmdd
ddmmm
mm/dd
dd/mm
Action
From the main menu, open the Settings menu.
Form the Settings menu, open the Regional menu.
From the Regional menu, open Time menu.
From the Time menu, select and open Date Format.
The Date Format screen appears.
Scroll through the Date Format options to select the format you want.
A check mark appears beside the format currently in use.
To enable a format, scroll to the format, and press Ok or press the
send key.
A check mark appears beside the option, to indicate that it is enabled.
Press Ok, or press the send key.
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
—End—
Carrier VoIP
Nortel Networks Confidential