While On An Active Call; Using Call Hold; Transferring A Call - Nortel IP Phone 1110 User Manual

While on an active call

Follow these procedures to put a call on hold, transfer a call, and use the
conference call feature.
See
Navigation
•
•
•

Using call hold

The Hold feature allows you to suspend a call without terminating it. Follow
this procedure to use the hold feature.
Step
1
2

Transferring a call

Follow this procedure to transfer a call to another extension.
Step
1
Copyright © 2006 , Nortel Networks
.
"IP Phone 1110 components" (page 10)
"Using call hold" (page 31)
"Transferring a call" (page 31)
"Using conference call" (page 32)
Action
To put the call on hold, press the hold key.
The call is suspended.
Press the softkey with the DN assigned, select the DN from the Call
Services list, or press the line key.
The call is active again.
Action
During a call, press the key to which the transfer feature is assigned.
The call is put on hold and a dial tone sounds.
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
—End—
Carrier VoIP
for the location of the keys.
Nortel Networks Confidential
31