Selecting The Time Zone; Enabling Daylight Saving Time - Nortel IP Phone 1110 User Manual

48 Using the Regional Menu

Selecting the time zone

Follow this procedure to select a time zone.
Step
1
2
3
4
5
6

Enabling Daylight Saving Time

Follow this procedure to enable Daylight Saving Time.
Step
1
2
3
4
5
6
Copyright © 2006 , Nortel Networks
.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Regional menu.
From the Regional menu, select and open Time.
The Time menu opens.
From the Time menu, select and open Hours from GMT.
The hours from GMT screen appears.
Scroll through the list and select a time zone.
The time displayed changes to that of the selected zone.
Press Ok, or press the send key.
The time is displayed using the selected time zone. You return to
the previous screen.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Regional menu.
From the Regional menu, open the Time menu.
The Time menu opens.
From the Time menu, select and open Daylight Saving.
The Daylight Saving screen appears. The word Off appears with a
check mark beside it, to indicate that the feature is disabled.
Select On.
Press Ok, or press the send key.
Daylight Savings Time is enabled. The word On appears with a
check mark beside it, to indicate the feature is enabled.
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
—End—
Nortel Networks Confidential