Nortel IP Phone 1110 User Manual page 87

Key 2004 feature
assignment
4
Make Set Busy
5
Busy Override
6 Ring Again
7 Call Waiting
Examples of feature to softkey mapping
These examples illustrate how the system maps features to softkeys when
you make key assignments. In these examples:
•
•
•
•
Example 1: Assign a feature to a softkey
In this example, Three Way Call (profile: Hide when idle) is assigned to
softkey 1.
Example 1: Assign a feature to a softkey 1
Key 2004 feature assignment
2
Three Way Call
3 Call Forward
4 Make Set Busy
5
Busy Override
Copyright © 2006 , Nortel Networks
.
Feature profile
Hide when
active
Hide when idle
Never hide
Never hide
The list of currently assigned features starts out empty, to make it easier
for you to follow the mapping.
The tables show a logical map. The tables are not an example of what
you will see on the Status screen when you select Details from the Call
Services submenu.
The features that appear in these examples were chosen at random,
and are not an actual reflection of the features you can expect to find
assigned to your line.
Not all features are available on all telephones. Consult your system
administrator to verify which features are available to you.
Feature profile
Hide when idle
Hide when active
Hide when active
Hide when idle
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
1110 softkey
assignment
2
2
3
None
Carrier VoIP
Softkey assignment 87
Automatic softkey
assignment on 1110
Yes. The feature appears
only when the terminal is
idle.
Yes. The feature appears
only when the terminal is
active.
Yes. The feature always
appears.
All softkeys are allocated.
Therefore the feature is not
automatically provisioned.
1110 softkey assignment
1
None
None
None
Nortel Networks Confidential