Viewing, Disabling, Or Enabling The Auto Login Feature; Carrier Voip; Nortel Ip Phone 1150E User Guide (Cicm - Nortel 1150E User Manual

80 Using the User menu
Step
1
2
3

Viewing, disabling, or enabling the auto login feature

Any maintenance activity, for example a firmware upgrade, forces a log off
from the network. If you enable auto login, you are automatically logged on
to the IP Client Manager when the terminal is available again.
Prerequisites
You must have permission to edit the auto login feature. If you have
permission, a check mark appears next to Enabled when the screen
appears.
Follow this procedure to view, enable, or disable the auto login feature.
Step
1
2
3
4
5
Copyright © 2009 Nortel Networks
.
Action
From the main menu, open the User menu.
From the User menu, select and open Login Type.
If the current login type is unique, Unique is displayed. If the
current login type is joint, Joint is displayed.
Press Ok, or press the send key.
You return to the User menu.
Action
From the main menu, open the User menu.
From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login
profile.
If you do not have permission to edit this feature, the procedure
is complete.
If you have permission to edit this feature, press Ok, or press
the send key.
The Enabled screen appears. A check mark appears if the
feature is enabled.
Perform one of these actions:
•
To enable Auto Login, select Enabled.
•
To disable Auto Login, select Disabled.
Press Ok, or press the send key.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
--End--