Viewing, Disabling, Or Enabling The Auto Login Feature - Nortel 1140E User Manual

64 Using the User menu
2
3

Viewing, disabling, or enabling the auto login feature

Any maintenance activity, for example a firmware upgrade, forces a log off
from the network. If you enable auto login, you are automatically logged on
to the IP Client Manager when the terminal is available again.
Prerequisites
You must have permission to edit the auto login feature. If you have
permission, a check mark appears next to Enabled when the screen
appears.
Follow this procedure to view, enable, or disable the auto login feature.
Step
1
2
3
4
5
Copyright © 2006, Nortel Networks
.
From the User menu, select and open Login Type.
The Unique screen appears. If Unique is enabled, Ok appears
above the far left soft key.
Press the down navigation key to view the Joint screen.
If Joint is enabled, Ok appears above the far left soft key.
Action
From the main menu, open the User menu.
From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login profile.
If you do not have permission to edit this feature, the procedure is
complete.
If you have permission to edit this feature, press Ok, or press the
send key.
The Enabled screen appears. A check mark appears if the feature
is enabled.
Perform one of these actions:
• To enable Auto Login, select Enable.
• To disable Auto Login, select Disable.
Press Ok, or press the send key.
A check mark appears beside the item you selected. You return
to the Auto Login screen.
Carrier VoIP
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
—End—
Nortel Networks Confidential