Installing A Sim Card (Pdt 8134/8137 Only) - Symbol PDT 8100 Series Product Reference Manual

Installing a SIM Card (PDT 8134/8137 Only)

To install a SIM card into the PDT 8134 and PDT 8137:
1. Slide the latches on the battery door up and lift the battery door away from the PDT
8137. If the battery is installed, remove it.
2. Remove the flash card cover at the top of the battery compartment by pulling the
top out, and lifting the cover up.
3. Slide the metal clip on the SIM cardholder door to the right to release the SIM
cardholder.
4. Lift the cardholder door to an upright position.
Getting Started
1-11