About This Guide; Introduction; Chapter Descriptions - Symbol PDT 7200 Series Product Reference Manual

About This Guide

Introduction

®
The PDT 7200 Series Product Reference Guide for Windows CE provides general
instructions for the System Administrator for setting up, initializing, operating,
troubleshooting, and maintaining the PDT 7200 Series Windows CE terminal.

Chapter Descriptions

Chapter 1, Getting Started, describes the procedures for setting up the terminal.
Chapter 2, Software Installation on the Development PC, provides instructions on the
installation of the Software Developer's Kit.
Chapter 3, Spectrum24 Network Configuration describes the utilities that monitor and
configure the Spectrum24 wireless connection.
Chapter 4, Cradle Setup and Operation, describes the procedures for setting up the cradle,
and details the use of the cradle to charge the terminal's battery and perform host
communication.
Chapter 5, Operating the Terminal, provides detailed instructions on the operation of the
terminal.
Chapter 6, Configuring the Terminal, describes options for configuring the terminal to assist
in planning your application development, details the use of the TCM (Terminal
Configuration Manager) Utility and IPL (Initial Program Loader), which are used to build
and send the hex image from the development PC to the terminal.
Chapter 7, Communications explains how to use ActiveSync for communications between
the terminal and host PC.
ix