Configuring Rmon History; Defining Rmon History Control - Linksys SFE2000 Reference Manual

Configuring RMON History

This section contains the following topics:
•

Defining RMON History Control

• Viewing the RMON History Table
Defining RMON History Control
The RMON History Control Page contains information about samples of data taken from ports. For
example, the samples may include interface definitions or polling periods. To view RMON history
information:
1. Click Statistics > RMON > History. The RMON History Control Page opens.
The RMON History Control Page contains the following fields:
• History Entry No. — Number automatically assigned to the table entry number.
• Source Interface — Displays the interface from which the history samples were taken. The possible
field values are:
– Port — Specifies the port from which the RMON information was taken.
– LAG — Specifies the port from which the RMON information was taken.
Chapter 16:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
RMON History Control Page
Chapter
16
241